Now that I have finished the design phase. It is now time that I got on with building Veloci-velo!
I sent the unfolding file to a large format printer to get printed out at 1:1 scale. At this size the coroplast needs to cut out the bodyshell is only two sheets which equates to about 2kg which is what I calculated and hopefully will keep the total weight of Veloci-velo below 22kg (48 pounds).
I sent the unfolding file to a large format printer to get printed out at 1:1 scale. At this size the coroplast needs to cut out the bodyshell is only two sheets which equates to about 2kg which is what I calculated and hopefully will keep the total weight of Veloci-velo below 22kg (48 pounds).
Plans at 1:1 coming out of the printer.
Here is a image of the plans with the 'mule' chassis in position on the floor plan.
No comments:
Post a Comment